BUNGEE MOUNT FOR VYPER/GEKKO/VYTEC
![](/img/m/91.jpg)
BUNGEE MOUNT FOR UWATEC COMPASS
![](/img/m/91.jpg)
BUNGEE MOUNT FOR SK7
![](/img/m/91.jpg)
BUNGEE MOUNT FOR ALADIN PRIME & DIGITAL GAUGE
![](/img/m/91.jpg)
WRIST DEPTH GAUGE 70 M
![](/img/m/540.jpg)
Wrist analog depth gauge up to 70 m, with maximum depth marker. Very useful in apnea or spearfishing lowered to control depth.
2nd STAGE 90° REVOLVING CONNECTOR
![](/img/m/540.jpg)
Fixed elbow to place between the second stage and the hose, which allows routing to 90 degrees. Made of chrome plated brass. Thread 9/16 "Male to 9/16" female.
90° LP SWIVEL
![](/img/m/91.jpg)
ON/OFF REGULATOR VALVE LONG FLOWSTOP
![](/img/m/540.jpg)
On / off valve that opens or closes the air flow into the hose line where it is installed. It can be installed on any standard LP regulator hose. Approximate length: 7.8 cm
ON/OFF REGULATOR VALVE SHORT
![](/img/m/540.jpg)
On / off valve that opens or closes the air flow into the hose line where it is installed. Ideal to place on the second stage regulator due to its small size. Approximate length: 4.5 cm
VITON O-RINGS (14 Sizes)
![](/img/m/540.jpg)
O-rings box Viton 85 material shore A hardness, compatible with oxygen; with 14 different sizes and 10 units of each measure.
WRIST WET NOTE
![](/img/m/540.jpg)
Underwater slate, with a special shape that fits to the wrist or forearm and allows place with other instruments without any disturb.
WET NOTE CORDURE COVER
![](/img/m/540.jpg)
TDS slate book with 40 waterproof pages and cordura cover with small pockets. Includes graphite pen attached with bungee to one edge of the cover. Allows writing in and out of the water.
WET NOTE
![](/img/m/153.jpg)
S80 STAGE TANK HARNESS
![](/img/m/540.jpg)
Complete harness for mounting a side tank for stage, bailout or side mount. It is valid for aluminum cylinders used in technical diving of the S80 type. The set comes pre-assembled and requires minimal installation by the user, thus customizing the position of the tank.
S40 STAGE TANK HARNESS
![](/img/m/540.jpg)
Complete harness for mounting a side tank for stage, bailout or side mount. It is valid for aluminum cylinders used in technical diving of the S40 type. The set comes pre-assembled and requires minimal installation by the user, thus customizing the position of the tank.
ALUMINIUM TEK GOODMAN HANDLE ADJUSTABLE
![](/img/m/540.jpg)
TDS Goodman type handle made of lightweight anodized aluminum. The height of the handle is adjustable by means of a side screw with a wide knob, allowing it to be adjusted to the size of our hand and/or to the use with or without gloves. It is possible to adjust the height in immersion because it is not necessary to use a wrench.
RIGHT TWIN VALVE CAP BLACK
![](/img/m/540.jpg)
Modular side Right-type valves cap, to close the side exit to exit manifold or modular plug. Matt black finish of the military series.
LEFT TWIN VALVE CAP BLACK
![](/img/m/540.jpg)
Modular side Left-type valves cap, to close the side exit to exit manifold or modular plug. Matt black finish of the military series.
MANIFOLD 171 MM BLACK W/ ISOLATION VALVE
![](/img/m/540.jpg)
Manifold with isolation valve for twins mounting. 171 mm for 10/12 long twins. Matt black finish of the military series.
BATTERY FOR MARU 1500 USB-C LIGHT (18650)
![](/img/m/540.jpg)
TDS 18650 lithium battery USB-C for Maru 1500 diving light: Ion-Lithium battery 18650 USB-C type, compatible with TDS Maru 1500. It is also valid for other light models that uses this type of battery. Voltage: 3.6 V
- New
BATTERY FOR KAVE 2000 USB-C LIGHT (26650)
![](/img/m/540.jpg)
TDS 26650 lithium battery USB-C for Kave 2000 diving light: Ion-Lithium battery 26650 USB-C type, compatible with TDS Kave 2000. It is also valid for other light models that uses this type of battery. Voltage: 3.6 V
- New